FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
- 10. Suspension brackets
   + 10.1. Forward suspension bracket
   - 10.2. Back suspension bracket
      10.2.1. Technical characteristic
      + 10.2.2. Service and repair
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598 - ,

10.2. Back suspension bracket

10.2.1. Technical characteristic

GENERAL INFORMATION

Back suspension bracket independent, on the trekhplechy slanting levers connected pivotally to a beam of a back axis, the screw springs and telescopic shock-absorbers of bilateral action located in suspension bracket springs.

Depending on the version of a suspension bracket (standard or strengthened) shock-absorbers have different characteristics.

Shock-absorbers

Brand – Ford Motorcraft.

Installation of back wheels

Convergence of wheels – 0,3 ± 3,25 mm.

Naves of back wheels

Each nave is established on two conic bearings.

Adjustment happens by tightening of a nut of a nave of a wheel the corresponding moment.

Springs

Screw springs are located in front of shock-absorbers.

Quantity of working rounds of a spring
4
Diameter of a wire of a spring:
  – GL, CL model
12,05 mm
  – the GL, CL model with the hydraulic booster of steering
12,15 mm
  – the GL and Ghia model with engines with system of injection of fuel
12,25 mm

Tightening moments

Suspension bracket lever
80 – 95 Nanometers
Beam of a back axis
68,5 – 88 Nanometers
Case of the back bridge to a beam of a back axis
70 – 90 Nanometers
Nave of a back wheel
250 – 290 Nanometers
Nut of fastening of a wheel
100 Nanometer