FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
- 13. Body
   13.1. Care of a body
   + 13.2. Cowl
   - 13.3. Doors
      13.3.1. Removal and installation of doors
      13.3.2. Adjustment of provision of a door
      13.3.3. Removal and installation of the panel of an internal upholstery of doors
      13.3.4. Removal and installation of external handles of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a sealant of a door
      13.3.8. Removal and installation of glasses of a door
      13.3.9. Removal and installation of the mechanism of a window regulator
      13.3.10. Removal and installation of decorative side overlays of doors
      13.3.11. Removal and installation of decorative overlays of a frame of glasses of a door
      13.3.12. Removal and installation of external rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a luggage carrier
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation of a gas-filled emphasis of a door of a luggage carrier
      13.3.17. Removal, installation and adjustment of a trunk lid (Salon model)
      13.3.18. Removal and installation of the lock of a trunk lid (Salon model)
   + 13.4. External elements of a body
   + 13.5. Elements of salon
   + 13.6. System of heating and ventilation
   + 13.7. Conditioner
+ 14. Electric equipment


9d8db598

13.3. Doors

13.3.1. Removal and installation of doors

PERFORMANCE ORDER
1. To open a door and to disconnect the electric socket (it is specified by an arrow) from a door pillar.
2. As much as possible to open a door and to unscrew the limiter of opening of doors.
3. To unscrew on several turns of a nut of fastening of a door.
4. To open a door at an angle 60 ° to a body of the car and to remove it from loops.
5. Installation is made in the sequence, the return to removal.
6. If the new door is established, it is necessary to weld on it new loops.
7. Adjustment of provision of a door is made by movement of a locking finger of a door.