FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
- 13. Body
   13.1. Care of a body
   + 13.2. Cowl
   + 13.3. Doors
   + 13.4. External elements of a body
   + 13.5. Elements of salon
   - 13.6. System of heating and ventilation
      13.6.1. Removal and installation of the control unit of a heater
      13.6.2. Removal and installation of cables of management of a heater
      13.6.3. Removal and installation of a heater
      13.6.4. Dismantling and assembly of a heater
      13.6.5. Removal and installation of air ducts of a heater
   + 13.7. Conditioner
+ 14. Electric equipment


9d8db598

13.6. System of heating and ventilation

GENERAL INFORMATION

Fresh air comes to salon through an air inlet lattice before a windshield and moves the heater fan in interior of the car. Air passes through a heater and goes by means of system of the gates operated by cables to nozzles of system of heating and ventilation. For air heating cold air passes through a heater radiator. The radiator is located in the case of a heater and heats up hot cooling liquid.

For increase in a stream of air the three-speed fan is used. For operation of the fan with various speed depending on position of the switch consistently with the engine of the fan ballast resistance join.

Resistance are located on a fan payment. At failure of any of resistance replacement of all payment is required. The heater and the fan are established in salon under the dashboard.