FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
- 14. Electric equipment
   14.1. Technical characteristic
   14.2. Safety locks and relay
   14.3. Electronic control units
   14.4. System of the central blocking
   14.5. System of indexes of turns
   14.6. Fuel computer
   14.7. Additional control system
   + 14.8. Generator
   + 14.9. Starter
   + 14:10. Windshield screen wiper, knot of indexes and headlight
   14:11. Removal and installation of a combination of devices
   14:12. External and internal lighting
   + 14:13. Other electric equipment
   + 14:14. Electrical circuitries


9d8db598

14:11. Removal and installation of a combination of devices

GENERAL INFORMATION

All control and measuring devices are placed on a combination of devices. Replacement of control bulbs and measuring devices requires removal of a combination of devices.

Removal

PERFORMANCE ORDER
1. To disconnect a weight wire from the accumulator.

Prevention

At the same time information in electronic memory devices is erased from memory.


The cars manufactured to 04.1992 years
2. To unscrew four screws (are specified by shooters) fastenings of a decorative overlay of a combination of devices and to remove it.
3. To unscrew four screws (are specified by shooters) fastenings of a combination of devices and a few tax forward a combination of devices from the forward panel.
The cars manufactured since 04.1992
4. To unscrew screws (are specified by shooters) and to disconnect clips (are specified by shooters) fastenings of a decorative overlay of a combination of devices and to remove it.
5. To unscrew four screws (are specified by shooters) fastenings of a combination of devices and to remove it.
6. It is also necessary to separate the regulator of lighting of devices.
All models
7. To remove the socket of multicontact connection from the back party.

Prevention

The socket of red color of the graphic display has a stopper which needs to be wrung out previously.


8. To disconnect a speedometer drive cable for what to shift to the right a big lock ring of fixing of a cable of a speedometer to a combination of devices.
9. To take a combination of devices from the dashboard.

Installation

For installation of a combination of devices it is necessary to perform operations in the return sequence in relation to removal process.

Removal and installation of measuring devices

PERFORMANCE ORDER
1. To disconnect a weight wire from the accumulator.

Prevention

At the same time information in electronic memory devices is erased from memory.


2. To remove a combination of devices from the dashboard. It is possible to place a combination of devices on the table covered with soft lint-free fabric devices down.
3. To remove two clips from a combination of devices, having picked up them the screw-driver.
4. To remove all control bulbs (are specified by shooters), turning a cartridge of their fastening counterclockwise.
5. On the cars manufactured to 05.1989 g to unscrew all nuts on plugs of an assembly payment and to release a payment from clamps and to remove it.
6. On the cars manufactured from 06.1989 g it is careful to remove an assembly payment from a combination of devices.
7. In the presence of adjusting handles from glass of a combination of devices to remove them.
8. To remove two fixing clips from the lower part of glass, to turn glass up and to remove it.
9. For removal of a speedometer to unscrew three (in the cars manufactured to 01.1992 g) or two (from 02.1992 g) the screw of fastening of a speedometer, the combinations of devices located from the back party and to remove a speedometer pushing it forward.
10. For removal of hours or a tachometer to unscrew three screws of fastening located from the back party of a combination of devices and to remove the device pushing it forward.

Prevention

It is possible to have a tachometer a forward part down only for a short time as from a tachometer silicone liquid can pour out.


11. For removal of indexes of level of fuel and temperature of cooling liquid to unscrew three screws of fastening located from the back party of a combination of devices and to remove devices pushing them forward.

Installation

For installation of devices it is necessary to perform operations in the return sequence in relation to removal process.