FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
- 1.1. Identification of the car
   1.2. Prevention signs
   1.3. Dashboard and combination of devices
   1.4. Control levers on a steering column
   1.5. Keys
   1.6. Doors
   1.7. Blocking of a steering column / lock of ignition
   1.8. Manual transmission
   1.9. Automatic transmission
   1.10. Window regulators with the electric drive
   1.11. Adjustment of provision of a steering wheel
   1.12. Sitting lobbies
   1.13. Illumination of salon
   1.14. External rear-view mirrors with the electric drive
   1.15. Increase in volume of the luggage compartment
   1.16. Screen wipers and washers
   1.17. Raising of the car
   1.18. Towing of the car
   1.19. Start of the engine
   1.20. Start of the cold petrol engine
   1.21. Start of the hot petrol engine
   1.22. Start of the petrol engine with a fuel modulation
   1.23. Start of the diesel engine
   1.24. Features of operation of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

1.12. Sitting lobbies

GENERAL INFORMATION


Prevention

You do not make adjustment of seats during the movement of the car.


Longitudinal movement of sitting is made after a raising of the bracket located under a forward part of sitting up. After longitudinal adjustment and an otpuskaniye of a bracket it is obligatory to check that sitting is accurately recorded in new situation.

Change of height of a pillow of sitting of the driver is made by rotation of the handle located in a forward part of sitting. Rotation of the handle counterclockwise makes to rise of sitting, and clockwise – to lowering.

The inclination of a back of sitting is regulated by rotation of the handle located in the lower part of a back of sitting.

For adjustment of the lower part of a back of sitting to lift the pump handle up, to pump (And) or to pit surplus of air, having pressed the button (V) before receiving the required bend of a back and to lower the pump handle.

Heating of front seats

Inclusion of heating of pillows and backs of front seats is made by the switch with a control bulb located on the central console. Warming up of seats happens in 5–6 minutes. Temperature of heating of seats is regulated by thermostats.