FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
- 2. Maintenance
   2.1. Frequency of service of cars
   2.2. Each 10 000 km or once a year
   2.3. Each 40 000 km
   2.4. Each 60 000 km or in 2 years
   2.5. Check of level of engine oil
   2.6. Replacement of engine oil and filter
   2.7. Places of possible leak of engine oil and their definition
   2.8. Check of level and replacement of cooling liquid
   2.9. Check of tightness of the cooling system
   2.10. Spark plugs
   2.11. Replacement of the air filter
   2.12. Replacement of the fuel filter
   2.13. Replacement of the valve of ventilation of a case of the engine
   2.14. Check of liquid in the air conditioning system
   2.15. Check of level of oil in the transmission
   2.16. Check of level of oil in the back bridge
   2.17. Check of a condition of a protective cover of a power shaft
   2.18. Adjustment of a brake tape in the automatic transmission
   2.19. Check of a condition of lobbies and back brake shoes
   2.20. Check of level and replacement of brake fluid
   2.21. Check of a condition of a suspension bracket
   2.22. Check of level of liquid in system of the amplifier of steering
   2.23. Cleaning of a drain for the condensate which is formed during the operation of the conditioner
   2.24. Recommendations about engine oils
   2.25. Specifications
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

2.7. Places of possible leak of engine oil and their definition

GENERAL INFORMATION

Places of possible leak of engine oil:

 – the porous or damaged laying of a cover of a maslozalivny mouth;
 – connection of a hose of ventilation of a case with a cover of a head of the block of cylinders;
 – consolidation of a cover of a head of the block of cylinders;
 – laying of a head of the block of cylinders;
 – the interfaced surface of the distributor of ignition;
 – rubber laying of an oil filter;
 – laying of the oil pallet;
 – consolidations of a bent shaft.

Method of definition of leak of engine oil

PERFORMANCE ORDER
1. To check the level of engine oil and if necessary to add.
2. To carefully wash up the engine with use of a cleaner of the engine.
3. Places in which leak of oil is supposed to cover with a thin layer of talc or powder and to carry out a trial trip on distance of 30 km.
4. To survey the engine and to determine the place of leak of oil by existence of fresh smudges and to remove the cause which led to oil leak.