FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
- 4. Cooling system
   4.1. Technical characteristic
   + 4.2. Discharge of liquid and filling of the cooling system
   4.3. Removal and installation of a radiator
   4.4. Removal and installation of the thermostat
   + 4.5. Fan
   4.6. Cooling system pump
   4.7. Temperature sensor
   4.8. Driving belt of the DOHC engine
   4.9. Mechanism of a tension of a driving belt
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

4.3. Removal and installation of a radiator

GENERAL INFORMATION

Fastening of the lower hoses of a radiator, element of cooling of gearbox oil and hose to a broad tank

And – fastening of the lower hoses of a radiator,

In – an element of cooling of gearbox oil,

With – a hose to a broad tank

PERFORMANCE ORDER
1. To merge cooling liquid from a radiator. There is no need to merge cooling liquid from the block of cylinders. On DOHC engines to remove the electric fan for increase in free space for extraction of a radiator.
2. To remove hoses from a radiator, having weakened collars of fastening of hoses and to pull together hoses with a provorachivaniye.
3. On the OHC models to disconnect the hose connecting a broad tank to a radiator.
4. On cars with the automatic transmission to disconnect elements of cooling of gearbox oil on a radiator (in the drawing the top connection of an element of cooling of gearbox oil on a radiator is shown).
5. On cars with the conditioner to disconnect a thermoswitch of the additional fan. If the thermoswitch is established on a radiator, to remove it.
6. To remove the top part of a casing of the fan, having unscrewed two bolts and having disconnected two clips and to remove the lower part of a casing of the fan having unscrewed two bolts.
7. To disconnect two top clips of fastening of a radiator, having put forward plastic traffic jams.
8. To lift a forward part of the car and to unscrew two lower bolts of fastening of a radiator (the lower bolt of fastening is specified by an arrow).
9. To slightly lower a radiator for release of the top fastening, then to remove a radiator, taking it from under the car.
10. For installation of a radiator it is necessary to perform operations in the return sequence in relation to process of its removal. After installation of pipelines of the cooling system it is necessary to fill system with cooling liquid and to remove from it air.