FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
- 4. Cooling system
   4.1. Technical characteristic
   + 4.2. Discharge of liquid and filling of the cooling system
   4.3. Removal and installation of a radiator
   4.4. Removal and installation of the thermostat
   + 4.5. Fan
   4.6. Cooling system pump
   4.7. Temperature sensor
   4.8. Driving belt of the DOHC engine
   4.9. Mechanism of a tension of a driving belt
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

4.7. Temperature sensor

GENERAL INFORMATION

The OHC engine temperature sensor (the collector is removed)

 

 

 

 

 


DOHC engine temperature sensor arrangement

The DOHC engine temperature sensor (it is specified by an arrow) is located on the forward party of an inlet collector.

For the OHC and DOHC models the arrangement of the sensor of temperature of the engine is shown in drawings.

On the V6 models the sensor is located below the top connection of a hose on the forward left side of a head of the block of cylinders.

PERFORMANCE ORDER
1. To take off pressure in the cooling system for what to unscrew a stopper of a broad tank.
2. To remove the socket from the sensor. To unscrew and remove the sensor.
3. Installation is made in the sequence of the return to removal. Before screwing up of the sensor to apply sealant on a sensor carving.