1985-1994 of release

Repair and operation of the car

Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Unleaded gasoline of V6, 2.4 engines and 2.9 dm3
   + 5.4. System of air supply
   + 5.5. PIERBURG carburetor
   + 5.6. WEBER 2V carburetor
   - 5.7. WEBER 2V TLD carburetor
      5.7.1. Removal and installation of the carburetor
      5.7.2. Adjustment of turns of idling and quality of mix
      5.7.3. Needle valve of the float-operated camera
      5.7.4. Vacuum device of the drive of a butterfly valve of the secondary camera
      5.7.5. Replacement of a diaphragm of the valve of the economizer
      5.7.6. Automatic starting arrangement
      5.7.7. Adjustment of turns of bystry idling
      5.7.8. Removal and installation of a damper of a butterfly valve
      5.7.9. Adjustment
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


5.7. WEBER 2V TLD carburetor


The Weber 2V TLD carburetor is identical to the Weber 2V carburetor, is installed on DOHC engines, but has the following differences from the Weber 2V carburetor:

 – the butterfly valve of the secondary camera copes vacuum;
 – the fuel locking valve is installed;
 – the air gate with the electrowarmed-up starting automatic equipment and with vacuum and mechanical systems of a priotkryvaniye "pull down" is installed;
 – the damper of a butterfly valve damps sharp closing of the gate and reduces toxicity of exhaust gases. The pusher copes vacuum from an entrance collector. When the throttle opens, vacuum puts in action a pusher which opens a throttle more, than at an idling position. When the throttle is closed, the damper slows down closing of a throttle. It reduces amount of the burned-down fuel mix getting to the engine when the gate is closed, reducing thus contents WITH;
 – there is no step engine, and turns of idling are established manually by means of the adjusting screw.