FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. Technical characteristic
   5.2. Fuel
   5.3. Unleaded gasoline of V6, 2.4 engines and 2.9 dm3
   + 5.4. System of air supply
   + 5.5. PIERBURG carburetor
   + 5.6. WEBER 2V carburetor
   + 5.7. WEBER 2V TLD carburetor
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

5.9. Removal and installation of an inlet collector

GENERAL INFORMATION

Sockets of a plait of wires of system of injection of fuel

The socket of a plait of wires is specified by an arrow.

Places of putting sealant on the interfaced surfaces

Places of putting sealant are specified by shooters.

Removal from a collector of the fuel highway and gates of injection

The gate of injection is specified by an arrow.

OHC ENGINES

PERFORMANCE ORDER
1. To remove a weight wire from the accumulator.
2. To merge cooling liquid.
3. To disconnect vacuum tubes from a collector. The quantity of tubes depends on model and the equipment.
4. To remove sockets of plaits of fuel nozzles on the end of the pipeline, next to a partition.
5. To disconnect a wire of the sensor of a control bulb of pressure of oil under a collector.
6. To weaken collars and to remove the highway, the measuring instrument of a stream of air and the pipeline from a collector.
7. To uncover the distributor and to disconnect high-voltage wires.
8. To unscrew two nuts and to remove the support going from a collector to the right side of a head of cylinders.
9. To unscrew four bolts and to remove a support which connects the collector basis to the left side of the block.
10. To unscrew a bracket of a cable of an accelerator and to shift it aside.
11. To disconnect a tube of supply of fuel from a fuel arm and a returnable tube from the fuel pressure regulator.
12. To disconnect a cooling system hose from a collector.
13. To unscrew six nuts and bolts of fastening of a collector (it is specified by shooters) and to remove it. The grounding wire can be connected to one of hairpins by an additional nut.
14. To remove carefully from a head of the block of cylinders of the collector together with connecting details. If the distributor prevents removal, to unscrew a forward hairpin of a collector or to remove the distributor.
15. To remove laying from a head of the block of cylinders.
16. Installation is made in the sequence, the return to removal. To apply a sealant layer on the interfaced surfaces.

DOHC ENGINES

PERFORMANCE ORDER
1. To remove a weight wire from the accumulator.
2. To merge cooling liquid.
3. To disconnect cooling hoses from the case of the thermostat and an inlet collector.
4. To disconnect an airintaking branch pipe from a forward part of an inlet collector.
5. To disconnect hoses of ventilation of a case and vacuum hoses from an inlet collector.
6. To disconnect an accelerator cable.
7. To remove high-voltage wires from spark plugs and to shift them aside.
8. To disconnect wires from the switch of the fan of a radiator, the sensor of temperature of cooling liquid of the engine and the sensor of measurement of temperature.
9. To remove the socket of the sensor of provision of a butterfly valve.
10. To remove fuel nozzles.
11. To unscrew 10 bolts and 2 nuts of fastening of a collector to a head of the block of cylinders and to accurately remove an inlet collector. To remove laying.
12. To take 2 plastic candle laying from a nest in a head of cylinders.
13. Installation is made in the sequence, the return to removal. To fill in liquid in the cooling system and to check turns of idling and maintenance WITH.

V6 ENGINES

Final connection of the cooling system on the inlet pipeline of the V6 engine


Order of tightening of bolts of fastening of an inlet collector V6 engines


PERFORMANCE ORDER
1. To remove a weight wire from the accumulator.
2. To merge cooling liquid.
3. To uncover the throttle lever.
4. To weaken collars and to shift aside the highway the air collector stream measuring instrument.
5. To remove a hose of ventilation of a case.
6. To remove the top hose of a radiator and a hose of a heater from an exhaust outlet on a forward part of the pipeline.
7. To disconnect sockets from the valve of turns of idling, the sensor of measurement of temperature, the sensor of measurement of temperature of cooling liquid and the sensor of provision of a butterfly valve. To disconnect a plait of wires of fuel nozzles.
8. To disconnect an accelerator cable from the lever. On models with automatic transmission also to disconnect a cable of kick-down or the socket.
9. To disconnect tubes of giving and return of fuel.
10. To remove high-voltage wires and the distributor of ignition.
11. To unscrew eight bolts and to remove the camera of excessive pressure.
12. To unscrew seven bolts and to uncover a head of the block of cylinders.
13. To disconnect from an inlet collector bypass a hose of the water pump.
14. To unscrew eight bolts and to remove an inlet collector.
15. To remove an inlet collector together with pressure regulator, a fuel arm and a casing of the case of a throttle.
16. Installation is made in the sequence, the return to removal. To apply a sealant layer on the interfaced surfaces.