FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
- 8. Driveshaft and back bridge
   8.1. Technical characteristic
   + 8.2. Driveshaft
   - 8.3. Zadny Bridge
      8.3.1. Removal and installation of the back bridge
      8.3.2. Dismantling and assembly of the back bridge
      8.3.3. Dismantling of differential
      8.3.4. Assembly of differential
      8.3.5. Adjustment of bearings of gear wheels of the main transfer
      8.3.6. Adjustment of gear wheels of the main transfer
      8.3.7. Assembly and adjustment of the main transfer
      8.3.8. Replacement of a sealing ring of a gear wheel of the main transfer
   + 8.4. Power shafts
+ 9. Steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

8.3. Zadny Bridge

8.3.1. Removal and installation of the back bridge

GENERAL INFORMATION

Zadny Bridge

1 – remote plug,

2 – laying,

3 – flange of adjustment of a gap of the main transfer

Details of the back bridge

1 – case,
2 – differential bearings,
3 – leading gear wheel of the main transfer,
4 – the conducted gear wheel of the main transfer,
5 – cover of a case of the back bridge,
6 – differential box,
7 – semi-axial gear wheels,
8 – sattelita,
9 – type-setting laying,
10 – nut of the bearing of the leading gear wheel,
11 – a flange of the leading gear wheel for connection with the back hinge of the driveshaft,
12 – flange nut,
13 – sealing ring,
14 – blocking flange,
15 – holder of the bearing,
16 – compensation washer

Differential with the coupling of viscous coupling

1 – output shaft,
2 – differential box,
3 – sattelita,
4 – axis,
5 – semi-axial gear wheel,
6 – coupling,
7 – flange

PERFORMANCE ORDER
1. To lift the car.
2. To remove pillows of fastening of a back part of the exhaust system and to shift it aside.
3. To remove the driveshaft.
4. To remove power shafts from flanges of the back bridge for what from each party to unscrew six bolts of "Torx" of fastening of internal hinges to a shaft flange.
5. To disconnect from the bottom the left support of a beam of the back bridge for ensuring access to bolts of fastening of the back bridge to a beam.
6. To prop up the back bridge by means of a jack and to unscrew fastening bolts to a beam of a back suspension bracket.
7. To remove an arm of a suspension bracket of a cover of a case of the back bridge.
8. To unscrew hairpins of fastening of a case of the back bridge.
9. To lower a jack and to take the back bridge from under the car.

Installation

To perform operations in the return sequence in relation to removal process. After installation it is necessary to check oil level in a case of the back bridge.