FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
- 9. Steering
   9.1. Technical characteristic
   + 9.2. Service and repair
   + 9.3. Steering with the hydraulic booster
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

9. Steering

9.1. Technical characteristic

GENERAL INFORMATION

Description of a design

The system of steering has rack steering transfer.

The safe steering column has a two-piece shaft of a steering wheel with the crosswise hinge, and also the deformable casing of a shaft fixed under the forward panel and compressed in case of head-on collision.

Transfer number
20
Speed of a steering wheel (from an emphasis against the stop)
4,15
Diameter of a turn
11 m
Resistance moment during turn of a wheel of steering transfer
0,8 – 0,14 Nanometers

Tightening moments

Fastening of the case of steering transfer to a body cross-piece:
  – 1st stage
15 Nanometer
  – 2nd stage
to tighten on 90 °
Spherical hinge of steering thirst for a rotary fist
25 – 30 Nanometers
Flange of the elastic hinge to steering transfer
20 – 25 Nanometers
Cover of a driving gear wheel
17 – 24 Nanometers
Pusher cover to the case of steering transfer
6 – 9 Nanometers
Steering thirst for a gear lath
75 – 85 Nanometers

Hinge flange to a shaft of a steering wheel

20 – 25 Nanometers
Top holder of a steering column
45 – 55 Nanometers
Nut of a steering wheel
45 – 55 Nanometers
Wheel nut
100 Nanometer