FORD SCORPIO

1985-1994 of release

Repair and operation of the car



Ford Skorpio
+ 1.1. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. Driveshaft and back bridge
- 9. Steering
   9.1. Technical characteristic
   - 9.2. Service and repair
      9.2.1. Removal and installation of steering transfer
      9.2.2. Dismantling and assembly of steering transfer
      9.2.3. Removal and installation of a steering wheel
      9.2.4. Centering of a steering wheel
      9.2.5. Removal and installation of the lock of blocking of a steering column
      9.2.6. Removal and installation of a steering column
      9.2.7. Dismantling and assembly of a steering shaft
   + 9.3. Steering with the hydraulic booster
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tires
+ 13. Body
+ 14. Electric equipment


9d8db598

9.2. Service and repair

9.2.1. Removal and installation of steering transfer

GENERAL INFORMATION

Steering


Removal

PERFORMANCE ORDER
1. To establish a steering wheel in situation for the movement directly.
2. To unscrew a bolt of a tightening holder of a flange of the elastic hinge and to disconnect a shaft of a steering wheel from a driving gear wheel of steering transfer.
3. To lift the car and to remove forward wheels.
4. To take forelocks and to unscrew koronchaty nuts of spherical hinges of steering drafts.
5. To disconnect steering drafts from rotary fists of wheels by means of a stripper 13.006.
6. To unscrew two bolts of fastening of the case of steering transfer to a cross-piece of a body and to take steering transfer.

Installation

PERFORMANCE ORDER
1. To establish a gear lath in situation for advance (a half of an angle of rotation of a gear lath of transfer necessary for movement of a lath from one extreme situation to another).
2. To connect a driving gear wheel of transfer to a flange of the elastic hinge of a shaft of a steering wheel, observing the correct installation of both connected elements.
3. To establish steering transfer on the appropriate place and to tighten two bolts of fastening of the case of steering transfer to a body cross-piece.
4. To fix spherical hinges of both steering thirsts for rotary fists of wheels.
5. To tighten all threaded connections the corresponding moments.
6. To establish both forward wheels and to lower the car.
7. To check and in case of need to adjust a disorder / convergence of wheels.